The Network+ N10-009 guide
Network+ covers how networks are built, run, secured, and fixed: OSI layers, addressing and subnetting, routing and switching, wireless, network services, monitoring, security attacks and defenses, and a large troubleshooting domain. Expect lots of "which layer," "which tool," and "what's the most likely cause" questions, plus subnetting math.
What you're walking into
- Performance-based questions usually appear first: configure a subnet, match cables to connectors, place devices in a topology, or read device output. Flag them and come back if they eat time.
- N10-009 added more on cloud networking, SD-WAN, zero trust, SASE, infrastructure as code, and VXLAN.
- Practice subnetting until a /26 or /29 takes you seconds.
- This practice exam is 60 questions in 60 minutes, ending with a 5-question scenario set.
Domain map
| Domain | Weight | Focus |
|---|---|---|
| 1.0 Networking concepts | 23% | OSI, appliances, cloud, ports, media, topologies, IPv4/IPv6, SDN/SD-WAN, zero trust. |
| 2.0 Network implementation | 20% | Routing, switching, VLANs, STP, wireless, physical installation. |
| 3.0 Network operations | 19% | Documentation, lifecycle, monitoring, DR, DHCP/DNS/NTP, remote access. |
| 4.0 Network security | 14% | Authentication, segmentation, attacks, hardening, NAC. |
| 5.0 Network troubleshooting | 24% | Methodology, cabling, services, performance, wireless, tools and commands. |
A two-week study plan
Baseline
Take the full practice exam timed. Note weak domains.
Concepts & subnetting
OSI, ports, and subnetting first. Do 10 subnetting problems a day until they're automatic.
Implementation & troubleshooting
Routing, VLANs, STP, wireless, then troubleshooting symptoms and tools.
Full exams
Full timed exams every other day with review. Flashcards daily.
Light review
Ports, numbers, and traps only.
Networking concepts cheat sheet
| Layer | Name | Data unit | Examples |
|---|---|---|---|
| 7 | Application | Data | HTTP, DNS, SMTP, FTP |
| 6 | Presentation | Data | Encryption, encoding, compression (TLS is often placed here) |
| 5 | Session | Data | Session setup and teardown |
| 4 | Transport | Segment / datagram | TCP, UDP, ports |
| 3 | Network | Packet | IP, routers, ICMP, layer 3 switches |
| 2 | Data link | Frame | MAC addresses, switches, VLANs, ARP |
| 1 | Physical | Bit | Cables, hubs, repeaters, transceivers |
Appliances
- Router (layer 3, between networks), switch (layer 2, within a network), layer 3 switch (routes between VLANs).
- Firewall (filters by rules; next-gen firewalls inspect applications), IDS (detects and alerts), IPS (inline, blocks).
- Load balancer, proxy (forward for clients, reverse for servers), wireless controller for lightweight APs.
- NFV: network functions (firewalls, routers) running as software on standard hardware or VMs.
Cloud networking
- VPC/VNet: your private network in the cloud. Security groups (stateful, per instance) vs network ACLs (stateless, per subnet).
- Internet gateway gives public subnets internet access. NAT gateway lets private subnets reach out without inbound access.
- Connectivity: VPN over the internet or a dedicated private link (Direct Connect, ExpressRoute).
- Service models: IaaS (you manage OS and up), PaaS (you manage apps and data), SaaS (you just use it). Deployment: public, private, hybrid.
- Scalability (can grow) vs elasticity (grows and shrinks automatically). Multitenancy: shared infrastructure.
Traffic & topologies
- Unicast (one to one), multicast (one to a group), broadcast (one to all, IPv4 only), anycast (to the nearest of many, used by DNS and CDNs).
- Topologies: star/hub-and-spoke, mesh (full or partial), point-to-point, hybrid.
- Three-tier: core, distribution, access. Collapsed core merges core and distribution.
- Spine-leaf: every leaf connects to every spine. Predictable latency for east-west traffic (server to server) in datacenters. North-south traffic enters or leaves the datacenter.
Media & connectors
- Copper: Cat 5e (1G, 100 m), Cat 6 (10G to 55 m), Cat 6a (10G, 100 m), Cat 8 (25/40G, 30 m). STP resists interference better than UTP.
- Fiber: single-mode (long distance), multimode (short). Connectors: LC, SC, ST, MPO (many fibers). DAC/twinax for short runs.
- Other connectors: RJ45 (Ethernet), RJ11 (phone), F-type (coax, cable modem), BNC (older coax).
- Wireless WAN: cellular (4G/5G), satellite (high latency for GEO, lower for LEO).
IPv4 & IPv6
- Private: 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16. Loopback 127.0.0.1. APIPA 169.254.0.0/16.
- IPv6 types: global unicast (2000::/3), link-local (fe80::/10), unique local (fc00::/7), multicast (ff00::/8). Loopback ::1. No broadcast.
- SLAAC: hosts build their own IPv6 address from the router's prefix. DHCPv6 can also assign.
- Transition: dual stack (both at once), tunneling (IPv6 over IPv4), NAT64 (IPv6-only clients reach IPv4).
Modern architectures
- SDN: separates the control plane (central controller) from the data plane (forwarding devices).
- SD-WAN: application-aware routing over any transport (MPLS, broadband, LTE), central policy, zero-touch provisioning.
- VXLAN: layer 2 over layer 3 (UDP 4789), for datacenter interconnect and large multi-tenant networks.
- Zero trust: never trust by network location. Verify every request (identity, device, policy), least privilege, microsegmentation.
- SASE: networking (SD-WAN) and security (SSE: secure web gateway, CASB, ZTNA, FWaaS) delivered from the cloud.
- Infrastructure as code: playbooks and templates in version control. Detects configuration drift and makes changes repeatable.
Subnetting
Usable hosts = 2(32 − prefix) − 2. Block size = 256 − the interesting octet of the mask. Subnets start at multiples of the block size.
| Prefix | Mask | Block | Usable hosts |
|---|---|---|---|
| /24 | 255.255.255.0 | 256 | 254 |
| /25 | 255.255.255.128 | 128 | 126 |
| /26 | 255.255.255.192 | 64 | 62 |
| /27 | 255.255.255.224 | 32 | 30 |
| /28 | 255.255.255.240 | 16 | 14 |
| /29 | 255.255.255.248 | 8 | 6 |
| /30 | 255.255.255.252 | 4 | 2 (point-to-point links) |
| /31 | 255.255.255.254 | 2 | 2 (point-to-point, RFC 3021) |
| /23 | 255.255.254.0 | 512 | 510 |
| /22 | 255.255.252.0 | 1024 | 1022 |
Worked example: 192.168.10.77/27
- Block size 32 → subnets at .0, .32, .64, .96…
- .77 is in the .64 subnet. Network 192.168.10.64, broadcast 192.168.10.95.
- Usable range .65 – .94 (30 hosts).
Implementation cheat sheet
| Route source | Administrative distance |
|---|---|
| Directly connected | 0 |
| Static route | 1 |
| eBGP | 20 |
| EIGRP (internal) | 90 |
| OSPF | 110 |
| RIP | 120 |
| iBGP | 200 |
Routing
- Route selection order: longest prefix match first, then lowest administrative distance, then lowest metric.
- OSPF: link-state, areas (area 0 backbone), cost metric. BGP: path-vector, the internet's routing protocol between autonomous systems. EIGRP: advanced distance-vector (Cisco).
- NAT maps private to public addresses. PAT (NAT overload) shares one public IP using ports.
- FHRP (VRRP, HSRP): two routers share a virtual IP as the default gateway for redundancy.
- Subinterfaces (router on a stick) route between VLANs over one trunk.
Switching
- VLANs split broadcast domains. Access ports carry one VLAN. Trunk ports carry many, tagged with 802.1Q. The native VLAN is untagged on a trunk and must match on both ends.
- Voice VLAN: phones tag voice traffic on the same port as a PC.
- SVI: a VLAN interface on a layer 3 switch, used as the VLAN's gateway.
- STP (802.1D) and RSTP (802.1w) block redundant links to prevent loops. The lowest bridge ID becomes root bridge. Port states: blocking, listening, learning, forwarding.
- Link aggregation (LACP) bundles links. Jumbo frames (MTU about 9000) for storage networks, configured end to end.
Wireless
- Standards: 802.11a (5 GHz), b/g (2.4 GHz), n / Wi-Fi 4 (2.4 and 5), ac / Wi-Fi 5 (5), ax / Wi-Fi 6/6E (2.4, 5, and 6 GHz), be / Wi-Fi 7.
- 2.4 GHz non-overlapping channels: 1, 6, 11. 2.4 GHz goes farther, 5 and 6 GHz are faster with more channels.
- Wider channels (40/80/160 MHz) are faster but leave fewer non-overlapping channels.
- Security: WPA3 (SAE replaces PSK), WPA2-AES. Enterprise mode uses 802.1X with RADIUS. Guest networks often use a captive portal.
- SSID = network name, BSSID = AP radio's MAC, ESSID = one SSID across many APs for roaming.
- Antennas: omnidirectional (all around) vs directional (Yagi, parabolic for point-to-point).
- Autonomous APs are configured individually. Lightweight APs are managed by a wireless controller.
Physical installation
- MDF (main distribution frame) connects to the outside. IDFs serve floors or areas.
- Patch panels terminate horizontal cabling. Fiber distribution panels handle fiber.
- Racks: match port-side intake and exhaust to the hot/cold aisle. Lockable racks for security.
- Power: UPS, PDUs, track power load. Environment: temperature, humidity, fire suppression.
- PoE: 802.3af (15.4 W), 802.3at / PoE+ (30 W), 802.3bt (60–100 W). Check the switch's total power budget.
Operations cheat sheet
Documentation & lifecycle
- Physical diagrams (cables, racks) vs logical diagrams (subnets, VLANs, routing). Layer 1, 2, and 3 diagrams.
- IPAM tracks IP address assignments. Asset inventory tracks hardware and software.
- Wireless site survey / heat map: plan AP placement and find dead spots.
- EOL (end of life: no longer sold) and EOS (end of support: no more patches). Replace before EOS.
- Change management: request, approval, testing, scheduled window, rollback plan.
- Configuration management: production config, backup config, and a baseline / golden config.
Monitoring
- SNMP: managers poll agents (UDP 161), agents send traps (UDP 162). Data is defined in the MIB. SNMPv3 adds authentication and encryption. v1 and v2c use plaintext community strings.
- Flow data (NetFlow, sFlow, IPFIX): who talked to whom, how much. Not full packets.
- Packet capture with a protocol analyzer: full packet detail. Use port mirroring (SPAN) or a TAP to see traffic.
- Syslog (UDP 514) to a collector. SIEM correlates logs and alerts.
- Baselines and anomaly alerts. API integration with ticketing and automation.
Network services
- DHCP: scope, exclusions, reservations, lease time, options (gateway, DNS). Process: DORA (Discover, Offer, Request, Acknowledge). DHCP relay / IP helper forwards requests across subnets.
- DNS records: A (IPv4), AAAA (IPv6), CNAME (alias), MX (mail), TXT (SPF, verification), NS, SOA, PTR (reverse), SRV (services).
- Secure DNS: DNSSEC (signed records), DoH (DNS over HTTPS, 443), DoT (DNS over TLS, 853).
- NTP (UDP 123) syncs clocks. PTP gives sub-microsecond precision. NTS secures NTP.
Remote access & DR
- Site-to-site VPN links networks. Client-to-site VPN for users. Split tunnel: only corporate traffic goes through the VPN. Full tunnel: everything does.
- Management: SSH, GUI, API, console. A jump box is a hardened host admins connect through. Out-of-band management uses a separate path (console server, cellular).
- DR: RPO (data loss), RTO (downtime), MTTR, MTBF. Sites: hot, warm, cold. Active-active vs active-passive.
- Test DR with tabletop exercises (discussion) and validation tests (actual failover).
Security cheat sheet
| Attack | What it does | Defense |
|---|---|---|
| VLAN hopping | Switch spoofing or double tagging to reach other VLANs | Disable auto-trunking (DTP), change the native VLAN, tag the native VLAN |
| MAC flooding | Fills the CAM table so the switch floods frames | Port security (limit MACs per port) |
| ARP poisoning / spoofing | Fake ARP replies for an on-path attack | Dynamic ARP inspection |
| Rogue DHCP | Hands out a malicious gateway or DNS | DHCP snooping |
| DNS poisoning / spoofing | Fake DNS answers redirect users | DNSSEC, secure resolvers |
| Evil twin / rogue AP | Fake AP with a legitimate SSID | WIDS/WIPS, 802.1X, user training |
| DoS / DDoS | Overwhelms a service | Rate limiting, upstream scrubbing, CDN |
| On-path (MITM) | Intercepts or alters traffic | Encryption (TLS, VPN), DAI |
Authentication & access
- RADIUS: UDP, encrypts only the password, common for network access and Wi-Fi. TACACS+: TCP 49, encrypts the whole payload, separates authentication, authorization, and accounting. Good for device administration.
- LDAP (389) / LDAPS (636) directories. SAML for web SSO. MFA: something you know, have, are.
- Authorization: least privilege, RBAC. Geofencing restricts by location.
- NAC: 802.1X port-based authentication (supplicant, authenticator, authentication server), posture checks, MAC filtering, port security.
Segmentation & hardening
- Separate guest, BYOD, IoT, and OT/ICS/SCADA networks from corporate systems.
- Screened subnet (DMZ) for public-facing servers, between trusted and untrusted zones.
- Hardening: disable unused ports and services, change default passwords, use SSH instead of Telnet, SNMPv3, patch firmware.
- ACLs, URL filtering, content filtering. Honeypots and honeynets are decoys that detect attackers.
- Compliance: PCI DSS (card data), GDPR (EU personal data, data locality).
Terms
- CIA triad: confidentiality, integrity, availability.
- Vulnerability (weakness), threat (something that could exploit it), exploit (the method), risk (likelihood × impact).
- Social engineering: phishing, tailgating, shoulder surfing, dumpster diving.
- PKI: certificates signed by a CA. Self-signed certificates aren't trusted by default.
Troubleshooting cheat sheet
- Identify the problem: gather information, question users, identify symptoms, find recent changes, duplicate the problem, approach multiple problems one at a time.
- Establish a theory of probable cause: question the obvious. Work top-to-bottom or bottom-to-top through the OSI model, or divide and conquer.
- Test the theory. If it's wrong, try a new theory or escalate.
- Establish a plan of action and identify potential effects.
- Implement the solution or escalate.
- Verify full system functionality and implement preventive measures.
- Document findings, actions, outcomes, and lessons learned.
Cabling & interfaces
- Attenuation: signal loss over distance (too long a run). Crosstalk: interference between pairs (bad termination, untwisted). EMI: from motors and lights (use STP or fiber).
- Wrong fiber type or mismatched transceivers (single-mode vs multimode, wavelength) → no link.
- TX/RX reversed on fiber → no link. Swap the pair.
- Counters: CRC errors (bad cable, interference, duplex mismatch), runts (too small, often collisions), giants (too big, MTU mismatch), drops (congestion).
- Port status: err-disabled (port security or loop guard tripped), administratively down (shut down by config).
- PoE device won't power up → power budget exceeded or wrong PoE standard.
Services & addressing
- Broadcast storm, high CPU on switches, MAC flapping → switching loop (STP disabled or misconfigured).
- Users on the wrong subnet or can't reach resources after a move → wrong VLAN on the access port.
- New clients get no address but existing ones work → DHCP pool exhaustion.
- Can reach local hosts but nothing remote → wrong default gateway. Some local hosts unreachable → wrong subnet mask.
- Traffic blocked one way → ACL order (first match wins, implicit deny at the end).
Performance & wireless
- Latency (delay), jitter (variation in delay, hurts voice and video), packet loss, bottleneck (slowest link), congestion.
- Wireless: channel overlap or co-channel interference, interference (microwaves, Bluetooth on 2.4 GHz), weak signal, insufficient coverage, roaming issues, client disassociation.
- Use a Wi-Fi analyzer to see channels and signal strength (RSSI). Move APs to non-overlapping channels and adjust power.
- QoS prioritizes voice and video (DSCP markings).
Tools
- Cable tester (continuity, wiremap), TDR / OTDR (distance to a break, copper / fiber), toner and probe (trace a cable), visual fault locator (find fiber breaks with light), loopback plug.
- Commands:
ping,tracert/traceroute,nslookup/dig,ipconfig/ip,arp -a,netstat,tcpdump,nmap. - Device commands:
show interface,show vlan,show mac-address-table,show ip route,show arp,show running-config,show power inline. - LLDP / CDP: discover neighboring devices and the port you're connected to.
Ports & numbers
| Port | Protocol | Port | Protocol |
|---|---|---|---|
| 20/21 | FTP | 389 / 636 | LDAP / LDAPS |
| 22 | SSH, SFTP | 443 | HTTPS |
| 23 | Telnet | 445 | SMB |
| 25 / 587 | SMTP / SMTP submission (TLS) | 514 | Syslog |
| 53 | DNS | 853 | DNS over TLS |
| 67/68 | DHCP | 993 / 995 | IMAPS / POP3S |
| 69 | TFTP | 1433 | SQL Server |
| 80 | HTTP | 3389 | RDP |
| 110 / 143 | POP3 / IMAP | 5060 / 5061 | SIP / SIP over TLS |
| 123 | NTP | 4789 | VXLAN (UDP) |
| 161 / 162 | SNMP / traps | 49 | TACACS+ |
| 1812 / 1813 | RADIUS auth / accounting | 88 | Kerberos |
| Item | Value |
|---|---|
| PoE / PoE+ / PoE++ (802.3af / at / bt) | 15.4 / 30 / 60–100 W |
| 2.4 GHz non-overlapping channels | 1, 6, 11 |
| Copper Ethernet max run | 100 m |
| Jumbo frame MTU | ~9000 bytes |
| Standard Ethernet MTU | 1500 bytes |
| IPv6 link-local prefix | fe80::/10 |